Before you begin: Please contact your AdCellerant Display representative to get your access to their TapClicks account. To view a list of the available dimensions and metrics, please refer to the AdCellerant Display connector listing.
Instructions:
Locate the AdCellerant Display Data Source
1] Log in to TapClicks and, on the Data menu, click Data Sources.
2] The menu of data sources appears.
3] To locate the AdCellerant Display data source, either scroll through the list of data sources or enter the data source into the search box in the upper right (results appear automatically).
Install the AdCellerant Display Smart Connector
4] Scroll down to the Smart Connector Marketplace section and on the AdCellerant Display Smart Connector click Install.
| NOTE: This will install a Smart Connector on your instance. You only need to authenticate to establish data flow. No additional configuration is needed. To learn more about the Smart Connector feature as a whole, check out this knowledgebase section. |
5] Install the Smart Connector when prompted by clicking Confirm.
6] You will land on the Smart Connector Authentication Screen. Click Continue.
7] Scroll to the Connection Settings section and click Authenticate.
8] When prompted, click Yes, Continue to move through the authentication flow.
9] You will land on the AdCellerant Display TapClicks Authentication screen. Enter your credentials or click Log in with Google.
10] Once authenticated, you will land in your AdCellerant account. Click Accept.
11] You will land back on your dashboard Smart Connector screen. Click the Go to Manage Data Sources button.
12] To assign your AdCellerant Display data to a TapClicks client, on the left side click on the data you want to assign.
13] To assign it to a client, on the right side choose a client from the existing client dropdown or create a new client to assign it to.
14] Edit General Settings, Additional Information and Primary Contact Information as needed and then click Assign Client.
15] After the data source is connected and data is assigned, you can either click Fetch My Data or wait until the regular data fetch occurs for data to start flowing into your dashboard.
Congratulations! You have connected your AdCellerant Display data to your TapClicks client records.
What’s Next?
For new assignments between a data source and TapClicks client records, an initial data fetch will occur. Each data source has a different lookback period which determines the amount of historical data that is fetched (measured in months, weeks, or days). To view the lookback period for this Data Source and the status of your data fetches as a whole, click Data Load Status in the Data Management menu on the left side of your dashboard. For more information about Data Load Status, please see this article.
If you need more assistance, our Customer Care team is standing by to help at customercare@tapclicks.com.